Automotive Carbon Cleaning Engine Decarbonizing Machine With Design
The carbon deposit in the intake valve:
Since the operation of each piston of the whole engine is not
synchronized, when the engine is extinguished, the intake valves of
some cylinders cannot be completely closed, and some unburned fuel
is continuously evaporated and oxidized, which will produce some in
the intake pipe, especially behind the throttle. Soft black carbon
deposits. On the one hand, these carbon deposits will roughen the
pipe wall of the intake pipe, and the intake air will generate
vortices in these rough places, affecting the intake effect and the
quality of the mixture.
On the other hand, these carbon deposits will block the idle speed
channel, causing the idle speed control device to be stuck or
beyond its adjustment range, which will result in low idle speed,
idling, various speeds of the attachments, failure to collect oil,
and exhaust. Excessive standards, oil and other phenomena.
If you are experiencing slow acceleration during driving, tempering
and tempering, and difficulty in cold start, your car's valve is
likely to have accumulated carbon. It is found that the idle speed
is low and the car is shaking when idling. When the accelerator is
pressed, the card is issued and the battery is not idling. Then the
air intake pipe of your car has accumulated carbon. With the above
phenomenon, you should go to the professional repair shop to check
the car in time.
Therefore, it is essential to clean the carbon in time. After
cleaning carbon by TD-501 engine carbon cleaner, the car will make
a good performance again. The engine noise disappeared, the air
pollution reduced, the engine power increased.
|Working Pressure||0-1.6 Mpa|
|Ambient temperature range||-5°C~50°C|
|Working medium||Chemical cleaning agent|
|Application||Gasoline car engines|
|Usage||Car engine carbon clean|
|Type||Other car care product|
1. It can clean carbon for five engine system parts: Three way
catalytic converter, combustion chamber, fuel system, spark plug
and intake valve.
2. The endoscope built-in can make the carbon cleaning
effectiveness more visible.
3. Do not need to take every engine parts down to remove the
4. After carbon removal ,20% engine power is increased, 70%
pollution is reduced, the engine noise is decreased, oil
consumption is reduced.
5. This machine can do three way catalytic converter carbon
cleaning with water based or oil based, which is the first
innovation in China.
6. HD screen can see the effect through endoscope
7. Only serve for the gasoline vehicles engines.