Hydrogen Carbon Clean 220V HHO Engine Carbon Cleaning Machine With
The model HO-1500 is called HHO Carbon Cleaning Machine, which
clean the engine carbon through burning the hydrogen with the
gasoline / diesel in the engine so as to melt the carbon. This
model is suitable for both gasoline and diesel cars like the cars,
SUV, small sized trucks. For the gasoline cars, it needs about 30
minutes to do carbon cleaning. And for the diesel cars like trucks,
it needs 40 to 60 minutes to clean the carbon. Before doing carbon
cleaning, the user should select the engine capacity on the screen
according to the different car and then set the cleaning time. This
machine can help improve the engine performance and also save the
|Input Voltage||AC 110~380V|
|Frequency||50 / 60 Hz|
|Cleaning Time||30 mins|
HHO Working Principle:
1. The water will be electrolyzed into Hydrogen and Oxygen in the
electrolytic tank of the machine
2. Filter the steam mixed in the hydrogen and oxygen in the machine
3. Convey the mixture of hydrogen and oxygen into the engine, and
then burning with the gasoline.
4. During the combustion, there will cause high temperature inside
the engine parts so that the carbon deposits will be melted.
5. The melted carbon deposits will become gases and water
discharges through the exhaust pipe.
Feature & Advantages:
1. It Only needs 20 minutes to clean engine carbon.
2. Obvious effects after cleaning the carbon, and satisfied
3. One machine can serve for both petrol and diesel vehicles.
4. A wide scope for vehicles: cars, SUV, Business cars, buses,
5. It can clean engine parts like intake, injector, DPF, spark
6. Improve cars' performance, increase 20% engine power and
decrease 72% pollution.
7. Guarantee 100% safety for using the machine.(Automotive negative
pressure alarm device)
8. There do no harm to engines.
9. After cleaning carbon, oil consumption, 70% of air pollution and
engine noised can be reduced, and 20% of engine power improved.
10. HD touch screen can make carbon cleaning more convenient.
Working Mode Description:
1. Negative pressure mode: It is used for the car engine that has
the the intake manifold, which can connect the gas outlet pipeline
directly. Under this mode, while cleaning the carbon the machine
can identify whether the engine is still running, or else it will
stop working and alarm.
2. Vibration Mode: If there is no intake manifold like some diesel
vehicles, the machine needs the vibration sensor to judge the
status of engine working.
The two working modes are all on the purpose of judging the engine
running, which keeps the danger away.
Core Safety Devices:
1. Anti-backfire system: Industry Multiple function Dry Anti
2. Over Pressure Protection: Pressure Sensor And Pressure
3. Electrolyte level Protection: High And Low Level Sensor
4. Over High Temperature Protection: Temperature Sensor
1. Turn on the power;
2. Select the car displacement and operating mode. There are three
operating modes to choose as the following:
(1) Negative pressure mode;
(2) vibration mode(usually for trucks and buses);
(3) manual mode;
Suggest to select (1) or (2) mode for safe.
3. Insert the gas outlet pipe of the machine into the car engine
intake manifold (air filter or brake vacuum tube).
4. Start the vehicle and keep idling.(Danger Notice:Ban stepping
the gas during carbon removing!)
5. Setting the time of cleaning carbon(up to types of vehicles,
usually 20 min),then click the start button on the control panel.
6. When hearing the buzzing sound, the machine finished engine
7. Turn off the power of the machine, then turn off the vehicle,
pull out the gas outlet pipe in the end.
8. Restore the car line.
9. Start the car, step on the throttle at a constant speed until
the speed is at 3000-3500 rpm and then release it,and do it again
after 3 seconds. This was repeated 6 times. Until the moisture and
dirt in the exhaust pipe are discharged, the carbon removal is
Service For Distributor:
1. Offer a professional website.
2. Make advertisement through social medial especially
advertisement focus on your local city or country.
3. Provide free advertising material, including brochures, posters
, poster display, even video design.
4. provide technical and marketing training or supports for
maintenance freely, ensure that all issues and complaints can be
handled within 48 hours.
5. Provide OEM service for free.